执行标准CLASSIFICATION | |||||||||||||||||||
符合GB/T 17853-2018 TSG308L-FN 0 相当 AWS A5.22/A5.22M EG308LT0-3 | |||||||||||||||||||
产品特性DESCRIPTION | |||||||||||||||||||
东南焊材®不锈钢自保护药芯焊丝，结合气保药性焊丝的飞溅低、成型美观、易脱渣、成分均匀等优点，并调整焊丝渣系使其不用外加保护气体，可以像手工焊条一样进行焊接，大大增加了焊接操作的便利与灵活。本产品可使用普通350、500等型号的焊接设备，关闭气体保护即可进行焊接，也可采用250、200足额输出功率的自保护专用焊机，产品适用于户外、高空等作业环境。 Self-shielded flux-cored welding wire for stainless steel, combined with the advantages of low spatter, beautiful shape, easy slag removal and uniform composition of gas-retaining welding wire, and adjusts the slag system of the welding wire so that it can be like a manual electrode without external shielding gas welding in the same way, which greatly increases the convenience and flexibility of the welding operation. This product is suitable for 350 and 500 general welding equipment and other small welding machines can be used. No external gas shield required. It is also suitable for self-protected special welding machines with full output power of 250 and 200. The product is suitable for outdoor, high-altitude, and other operating environments. Use instead of welding rod. | |||||||||||||||||||
应用APPLICATIONS | |||||||||||||||||||
适用于户外不锈钢焊接作业或进行展架、不锈钢结构件、户外作业、高空焊接作业等焊接环境。 Suitable for outdoor stainless steel welding operations, such as exhibition stands, stainless steel structural parts. | |||||||||||||||||||
电源类型CURRENT TYPE | 焊枪接正电极DC+ | 过程保护PROCESS | 无需气体保护Self-shielded Welding | ||||||||||||||||
焊接位置WELDING POSITIONS | 平焊、角焊、仰焊、立向上焊、立向下焊 Flat, fillet, tilt, vertical up , vertical down | ||||||||||||||||||
熔敷金属化学成分CHEMICAL COMPOSITION OF WELDED METAL % | |||||||||||||||||||
项目 | C | Si | Mn | Cr | Ni | Cu | Mo | Al | |||||||||||
GB/T Standard | ≤0.04 | ≤1.0 | 0.5-2.5 | 19.5-22.0 | 9.0-11.0 | ≤0.75 | ≤0.75 | - | |||||||||||
例值 Typical values | 0.035 | 0.48 | 1.05 | 19.85 | 9.53 | 0.04 | 0.03 | 0.54 | |||||||||||
熔敷金属力学性能MECHANICAL PROPERTIES OF WELDED METAL | |||||||||||||||||||
试验项目 | Rel/Rp0.2屈服强度（MPa） | Rm抗拉强度（MPa） | A伸长率（%） | 试验温度（℃） | KV2(J) | ||||||||||||||
GB/T Standard | - | ≥520 | ≥25 | - | - | ||||||||||||||
- | 569 | 34 | - | ||||||||||||||||
作业条件OPERATING CONDITIONS | |||||||||||||||||||
直径Diameter [mm] | φ0.8&0.9 | φ1.0 | φ1.2 | ||||||||||||||||
电流Current [A] | 平焊Flat | 100-180 | 120-220 | 150-230 | |||||||||||||||
上立焊/仰焊V-Up&Overhead | 100-160 | 120-200 | 150-220 | ||||||||||||||||
下立焊Vertical Downward | 110-190 | 130-230 | 160-230 | ||||||||||||||||
包装PACKAGING | |||||||||||||||||||
1kg 5kg 15kg 盘装 Coil 也可以定制其他包装和规格Other packaging and other diameters: please consult us | |||||||||||||||||||
执行标准CLASSIFICATION | |||||||||||||||||||
符合GB/T 17853-2018 TSG308L-FN 0 相当 AWS A5.22/A5.22M EG308LT0-3 | |||||||||||||||||||
产品特性DESCRIPTION | |||||||||||||||||||
东南焊材®不锈钢自保护药芯焊丝，结合气保药性焊丝的飞溅低、成型美观、易脱渣、成分均匀等优点，并调整焊丝渣系使其不用外加保护气体，可以像手工焊条一样进行焊接，大大增加了焊接操作的便利与灵活。本产品可使用普通350、500等型号的焊接设备，关闭气体保护即可进行焊接，也可采用250、200足额输出功率的自保护专用焊机，产品适用于户外、高空等作业环境。 Self-shielded flux-cored welding wire for stainless steel, combined with the advantages of low spatter, beautiful shape, easy slag removal and uniform composition of gas-retaining welding wire, and adjusts the slag system of the welding wire so that it can be like a manual electrode without external shielding gas welding in the same way, which greatly increases the convenience and flexibility of the welding operation. This product is suitable for 350 and 500 general welding equipment and other small welding machines can be used. No external gas shield required. It is also suitable for self-protected special welding machines with full output power of 250 and 200. The product is suitable for outdoor, high-altitude, and other operating environments. Use instead of welding rod. | |||||||||||||||||||
应用APPLICATIONS | |||||||||||||||||||
适用于户外不锈钢焊接作业或进行展架、不锈钢结构件、户外作业、高空焊接作业等焊接环境。 Suitable for outdoor stainless steel welding operations, such as exhibition stands, stainless steel structural parts. | |||||||||||||||||||
电源类型CURRENT TYPE | 焊枪接正电极DC+ | 过程保护PROCESS | 无需气体保护Self-shielded Welding | ||||||||||||||||
焊接位置WELDING POSITIONS | 平焊、角焊、仰焊、立向上焊、立向下焊 Flat, fillet, tilt, vertical up , vertical down | ||||||||||||||||||
熔敷金属化学成分CHEMICAL COMPOSITION OF WELDED METAL % | |||||||||||||||||||
项目 | C | Si | Mn | Cr | Ni | Cu | Mo | Al | |||||||||||
GB/T Standard | ≤0.04 | ≤1.0 | 0.5-2.5 | 19.5-22.0 | 9.0-11.0 | ≤0.75 | ≤0.75 | - | |||||||||||
例值 Typical values | 0.035 | 0.48 | 1.05 | 19.85 | 9.53 | 0.04 | 0.03 | 0.54 | |||||||||||
熔敷金属力学性能MECHANICAL PROPERTIES OF WELDED METAL | |||||||||||||||||||
试验项目 | Rel/Rp0.2屈服强度（MPa） | Rm抗拉强度（MPa） | A伸长率（%） | 试验温度（℃） | KV2(J) | ||||||||||||||
GB/T Standard | - | ≥520 | ≥25 | - | - | ||||||||||||||
- | 569 | 34 | - | ||||||||||||||||
作业条件OPERATING CONDITIONS | |||||||||||||||||||
直径Diameter [mm] | φ0.8&0.9 | φ1.0 | φ1.2 | ||||||||||||||||
电流Current [A] | 平焊Flat | 100-180 | 120-220 | 150-230 | |||||||||||||||
上立焊/仰焊V-Up&Overhead | 100-160 | 120-200 | 150-220 | ||||||||||||||||
下立焊Vertical Downward | 110-190 | 130-230 | 160-230 | ||||||||||||||||
包装PACKAGING | |||||||||||||||||||
1kg 5kg 15kg 盘装 Coil 也可以定制其他包装和规格Other packaging and other diameters: please consult us | |||||||||||||||||||
公网安备号申请中
