执行标准CLASSIFICATION | |||||||||||||||||||
符合GB/T 17853 TS316L-FC11 AWS A5.22 E316LT1-1 ISO 17633A T 19 12 3 L P C1 1 | |||||||||||||||||||
产品特性DESCRIPTION | |||||||||||||||||||
SWE316L主要成分为19Cr、12.5Ni和2.5Mo，更低的C含量，可降低间隙中析出碳化铬的可能性，从而增加稳定剂（如铌或钛）的效果。这种填充金属可抵抗奥氏体合金中的晶间腐蚀。 The main components of SWE316L are 19% Cr, 12.5% Ni, and 2.5% Mo. Its lower carbon content can reduce the possibility of chromium carbide precipitation in the gaps, thereby enhancing the effectiveness of stabilizers (such as niobium or titanium). This filler metal is resistant to intergranular corrosion in austenitic alloys. | |||||||||||||||||||
应用APPLICATIONS | |||||||||||||||||||
用于化学、医药、石油等作业环境。 It is used in operating environments such as chemistry, pharmaceuticals, and petroleum. | |||||||||||||||||||
电源类型CURRENT TYPE | 焊枪接正电极DC+ | 过程保护PROCESS | 二氧化碳气保焊100%CO2 Gas-shielded Welding | ||||||||||||||||
焊接位置WELDING POSITIONS | 平焊、角焊、仰焊、立向上焊、立向下焊 Flat, fillet, tilt, vertical up , vertical down | ||||||||||||||||||
熔敷金属化学成分CHEMICAL COMPOSITION OF WELDED METAL % | |||||||||||||||||||
项目 | C | Si | Mn | P | S | Cu | Ni | Cr | Mo | Al | |||||||||
GB/T Standard | ≤0.04 | ≤1.0 | 0.50-2.50 | ≤0.040 | ≤0.030 | ≤0.75 | 11.0-14.0 | 17.0-20.0 | 2.0-3.0 | - | |||||||||
例值 Typical values | 0.031 | 0.35 | 1.30 | 0.023 | 0.005 | 0.025 | 12 | 18.65 | 2.42 | - | |||||||||
熔敷金属力学性能MECHANICAL PROPERTIES OF WELDED METAL | |||||||||||||||||||
试验项目 | Rel/Rp0.2屈服强度（MPa） | Rm抗拉强度（MPa） | A伸长率（%） | 试验温度（℃） | KV2(J) | ||||||||||||||
GB/T Standard | - | ≥485 | ≥25 | - | - | ||||||||||||||
- | 540 | 42.5 | - | - | |||||||||||||||
作业条件OPERATING CONDITIONS | |||||||||||||||||||
直径Diameter [mm] | φ1.0 | φ1.2 | φ1.6 | ||||||||||||||||
电流Current [A] | 平焊Flat | 120-200 | 140-220 | 200-300 | |||||||||||||||
上立焊/仰焊V-Up&Overhead | 100-160 | 140-180 | 220-320 | ||||||||||||||||
下立焊Vertical Downward | - | - | - | ||||||||||||||||
包装PACKAGING | |||||||||||||||||||
5kg 12.5kg 盘装 Coil 也可以定制其他包装和规格Other packaging and other diameters: please consult us | |||||||||||||||||||
执行标准CLASSIFICATION | |||||||||||||||||||
符合GB/T 17853 TS316L-FC11 AWS A5.22 E316LT1-1 ISO 17633A T 19 12 3 L P C1 1 | |||||||||||||||||||
产品特性DESCRIPTION | |||||||||||||||||||
SWE316L主要成分为19Cr、12.5Ni和2.5Mo，更低的C含量，可降低间隙中析出碳化铬的可能性，从而增加稳定剂（如铌或钛）的效果。这种填充金属可抵抗奥氏体合金中的晶间腐蚀。 The main components of SWE316L are 19% Cr, 12.5% Ni, and 2.5% Mo. Its lower carbon content can reduce the possibility of chromium carbide precipitation in the gaps, thereby enhancing the effectiveness of stabilizers (such as niobium or titanium). This filler metal is resistant to intergranular corrosion in austenitic alloys. | |||||||||||||||||||
应用APPLICATIONS | |||||||||||||||||||
用于化学、医药、石油等作业环境。 It is used in operating environments such as chemistry, pharmaceuticals, and petroleum. | |||||||||||||||||||
电源类型CURRENT TYPE | 焊枪接正电极DC+ | 过程保护PROCESS | 二氧化碳气保焊100%CO2 Gas-shielded Welding | ||||||||||||||||
焊接位置WELDING POSITIONS | 平焊、角焊、仰焊、立向上焊、立向下焊 Flat, fillet, tilt, vertical up , vertical down | ||||||||||||||||||
熔敷金属化学成分CHEMICAL COMPOSITION OF WELDED METAL % | |||||||||||||||||||
项目 | C | Si | Mn | P | S | Cu | Ni | Cr | Mo | Al | |||||||||
GB/T Standard | ≤0.04 | ≤1.0 | 0.50-2.50 | ≤0.040 | ≤0.030 | ≤0.75 | 11.0-14.0 | 17.0-20.0 | 2.0-3.0 | - | |||||||||
例值 Typical values | 0.031 | 0.35 | 1.30 | 0.023 | 0.005 | 0.025 | 12 | 18.65 | 2.42 | - | |||||||||
熔敷金属力学性能MECHANICAL PROPERTIES OF WELDED METAL | |||||||||||||||||||
试验项目 | Rel/Rp0.2屈服强度（MPa） | Rm抗拉强度（MPa） | A伸长率（%） | 试验温度（℃） | KV2(J) | ||||||||||||||
GB/T Standard | - | ≥485 | ≥25 | - | - | ||||||||||||||
- | 540 | 42.5 | - | - | |||||||||||||||
作业条件OPERATING CONDITIONS | |||||||||||||||||||
直径Diameter [mm] | φ1.0 | φ1.2 | φ1.6 | ||||||||||||||||
电流Current [A] | 平焊Flat | 120-200 | 140-220 | 200-300 | |||||||||||||||
上立焊/仰焊V-Up&Overhead | 100-160 | 140-180 | 220-320 | ||||||||||||||||
下立焊Vertical Downward | - | - | - | ||||||||||||||||
包装PACKAGING | |||||||||||||||||||
5kg 12.5kg 盘装 Coil 也可以定制其他包装和规格Other packaging and other diameters: please consult us | |||||||||||||||||||
公网安备号申请中
