符合GB/T 29713 S410  相当 GB/T 29713 S410 AWS A5.9 ER410  ISO 14343-AG 13

产品特性DESCRIPTION

SW·ER410主要成分为12 Cr，全焊缝金属显微组织几乎全为马氏体。 焊接金属是空气硬化钢。为了实现许多工程目的的足够延展性的焊缝，需要进行预热和焊后热处理。此类填充金属最常见的应用是焊接具有相似成分的合金。 它还用于在碳钢上沉积覆盖层以抵抗腐蚀、侵蚀或磨损。

The main composition of SW·ER410 is 12% Cr, and the microstructure of the all-weld metal is almost entirely martensite. The weld metal is an air-hardening steel. To achieve welds with sufficient ductility for many engineering purposes, preheating and post-weld heat treatment are required. The most common application of this type of filler metal is welding alloys with similar compositions. It is also used to deposit claddings on carbon steel to resist corrosion, erosion, or wear.

应用APPLICATIONS

常用于水电站以及阀门等耐磨耐蚀场合，如12Cr13（SUS 410）。

It is often used in wear-resistant and corrosion-resistant applications such as hydropower stations and valves, for materials like 12Cr13 (SUS 410).

电源类型Current type

焊枪接正电极DC+

保护气体Protection

100%Ar

焊接位置WELDING POSITIONS            

平焊、角焊、仰焊、立向上焊、立向下焊 Flat, fillet, tilt, vertical up , vertical down

熔敷金属化学成分Chemical composition of welded metal %

项目

C

Si

Mn

P

S

Cu

Ni

Cr

Mo

GB/T Standard

≤0.12

≤0.50

≤0.60

≤0.030

≤0.030

≤0.75

≤0.60

11.5-13.5

≤0.75

例值 Typical values

0.080

0.30

0.41

0.021

0.011

0.33

0.19

11.83

0.35

作业条件OPERATING CONDITIONS

直径Diameter [mm]

Φ0.8

φ1.0

φ1.2

电流Current [A]

平焊Flat

70~150

100~200

140~220

包装PACKAGING

1kg   5kg  15kg 盘装 Coil    也可以定制其他包装和规格Other packaging and other diameters: please consult us

40-1000mm × 5kg   10kg 直条焊丝  Straight Stick Welding Wire